RFID Tags Unleashed: Know Your Options
Electronic tags (RFID-метки) come in a variety of designs, shapes, sizes, and operating frequencies, all of which depend on the physical properties of the object to which the tag is attached and the specific application requirements. In the Radio Frequency Identification (RFID) system, electronic tags are widely used and come in various types, each differing in structure, appearance, and function.
When selecting a tag, multiple factors must be considered. The following guide sorts out the classification and characteristics of electronic tags from the perspectives of working mode, readability, operating frequency, packaging form, and more.
Classification by Working Mode
| Тип |
Has Own Power Supply |
Working Characteristics |
Scope of Application |
| Active |
✅ |
Actively sends data, long distance |
Logistics, container management, etc. |
| Пассивный |
❌ |
Relies on reader power supply, low cost |
Retail, books, asset management, etc. |
| Semi-active |
✅ (powered only) |
Relies on reader activation to backscatter data |
Temperature and humidity monitoring, industrial equipment, etc. |
💡 Tips: Most of the RFID tags on the market are пассивный, because they do not require power, are small in size, low in cost, and offer great cost-effectiveness.
Classification by Readability and Writability
🟡 Read-only Electronic Tags
The information in the chip is written by the manufacturer and cannot be changed once written. Commonly used for identity recognition, anti-theft detection, etc.
🟡 Write-once Read-only (WORM) Tags
The user writes data during initial use, and it cannot be changed afterward. Suitable for high data security scenarios.
🟡 Read-write Tags
These contain programmable memory (such as EEPROM), support repeated erasing, and are widely used for asset management, inventory tracking, etc.
🟡 Read-write Tags with Sensors
Can record additional information such as temperature и pressure, ideal for cold chain logistics или environmental monitoring. Mostly активный или semi-active.
🟡 Read-write Tags with Transceivers
Support direct communication with other devices, usually active, used for complex device data interaction.
What Is the Capacity of Electronic Tags?
Generally, the data capacity of RFID tags ranges between 64 bits and 2KB. The larger the tag capacity, the more information it can store and the longer it can function independently—but with increased cost.
| Емкость |
Application Scope |
| 64–128 bit |
Simple code identification |
| 512 бит |
Can store basic product information |
| 1 KB+ |
Independent use, no database required |
Classification by Operating Frequency
| Frequency Band |
Диапазон частот |
Функции |
Application Scenarios |
| Low Frequency (LF) |
30–300 kHz |
Strong penetration, short transmission distance |
Animal identification, access control |
| High Frequency (HF) |
3–30 MHz (e.g., 13.56MHz) |
Low cost, medium reading distance |
Library, bus card |
| Ultra-High Frequency (UHF) |
860–960 MHz |
Long reading distance, fast speed, susceptible to interference |
Warehouse, logistics, supply chain |
| Microwave |
2.45GHz and above |
Longer reading distance, high cost |
Special environments |
✳️ Recommended Product Reference: IMPINJ MONZA R6 Ultra-High Frequency RFID Tag
| Project |
Parameters |
| Size selection |
50×18mm, 80×27mm, 128×18mm and other options |
| Surface material |
PET / Coated Paper / Thermal Paper |
| Тип чипа |
M4D / M4E / M4QT / M5 / M6 / U8 / U9 |
| Memory capacity |
32 / 128 / 512 bits |
| Рабочая частота |
860–960MHz (UHF) |
| Protocol standard |
EPC C1G2 / ISO18000-6C |
| Расстояние считывания |
Up to 6 meters (depending on the reader and environment) |
| Service life |
10 years, supports 100,000 reads and writes |
| Tag type |
Dry inlay (no glue), Wet inlay (with glue) |
| Functional features |
Waterproof / Weatherproof / Customizable appearance and printing |
| Packaging method |
Roll packaging: 1000 sheets/roll, 2000 sheets/roll or OPP bag packaging |
| Application areas |
Smart posters, electronic payment, logistics, warehousing, event management, asset tracking, etc. |
Dual-Frequency Technology: Combining Long Distance and Penetration
To solve the poor penetration issue of UHF tags, dual-frequency RFID tags are emerging, combining the strengths of low and high frequencies. These tags are activated by a low-frequency signal, then return data via a high-frequency signal. They offer both long-range reading и strong penetration, making them ideal for complex environments such as animal identification, sports timing, и metal interference.
Краткое содержание
When choosing RFID tags, you shouldn’t blindly pursue high performance or long range. Instead, evaluate based on the actual application scenario:
-
Do you need long-distance reading?
-
Or stronger penetration?
-
Do you need to write data repeatedly?
-
What материал is the tag attached to?
All these factors must be taken into account.
🧠 Tips:
-
For управление складом, UHF read-write tags are ideal.
-
For books или контроль доступа, HF read-only tags work best.
-
In cold chain logistics или animal management, active or dual-frequency sensor tags are often necessary.
🛒 Want to Learn More or Get Free Samples?
Please связаться с нами!
